How do I use Jason Markk Repel?
A step-by-step guide
How do I use Jason Markk Repel? A step-by-step guide
To protect your sneakers from dirt and moisture, using Jason Markk Repel is an excellent choice. This guide will walk you through the steps to effectively treat your sneakers with this protective product.
Step 1: Preparation
Start with thoroughly cleaned and completely dry sneakers. A clean, dry surface is essential for Jason Markk Repel to be effective. Any moisture or dirt can affect the adhesion of the protective layer, so take your time with this important preparation step. Are your sneakers dirty? Then use the Jason Markk Premium Deep Cleaner and Jason Markk Ready to Use Foam as a first step.
Step 2: Applying Jason Markk Repel
Now it's time to apply Jason Markk Repel. Shake the bottle well before use. Hold the spray bottle about 6 to 8 inches (15 to 20 centimeters) from the sneakers and spray the product evenly over the entire surface. Make sure you cover every part of the sneakers for optimal protection.
Step 3: Wipe certain areas
Wipe down any non-absorbent parts. This prevents water stains. Common non-absorbent parts of shoes include the midsoles, air bubbles, patent leather, and plastic parts.
Step 4: Drying
After applying Repel, let the sneakers dry in a well-ventilated area for at least 24 hours. Avoid direct heat sources, as these can affect the quality of the protective layer.
Step 5: Repeat for optimal protection
Repeat steps 2 through 4 again after at least 24 hours.
Tips for the Best Result
- Test the products on a small, inconspicuous part of the sneaker.
- Always perform a colourfastness test first, especially on coloured or unique materials.
- The longer you allow Repel to dry, the stronger the water-repellent effect will be.
- We recommend a minimum of 2 coats when applying Repel.
- For materials such as knits and meshes, we recommend at least 3 coats.
- Most leather sneakers don't immediately require a Repel protective layer, as it has a protective finish that seals the material against dirt and stains.
- Do not use Repel on untreated or vegetable tanned leather, as the material is not sealed and moisture will darken the material.
Jason Markk
Frequently Asked Questions
Are Jason Markk products safe?
Is it safe to use on suede and/or nubuck? If so, how do I clean suede?
Yes, when used correctly, all Jason Markk products are safe and highly effective on suede and/or nubuck.
Note : Due to the texture of suede, its open pores, and the varying qualities, it can be somewhat unpredictable. We recommend testing on an inconspicuous area first. Individual results may vary; use at your own risk.
Is Repel harmful to me or the environment?
How do I apply Repel?
The material must be clean and dry before applying. Hold the bottle upright about 6 to 8 inches (15 to 20 cm) from the shoe and spray evenly over the entire area of the shoe. Do not oversaturate. Use a cloth to blot and absorb any excess product. Allow it to dry/cure completely for 24 hours or longer. After the first coat has dried, repeat the steps and apply a second coat. Ensure shoes are completely dry before exposing them to liquids.
Tip : The longer you let Repel cure, the stronger the repellency.