SneakersER Sole BondER - Glue for sneakers

Instructions for use

1. Prepare the two surfaces to be joined by removing all dust and dirt.
2. Remove any existing adhesive using an adhesive remover.
3. Apply a thin, even layer to both surfaces using a brush or spreader.
4. Let the glue dry slightly for better adhesion. This takes about 20 minutes.
5. Repeat steps 3 and 4.
6. Bring the two surfaces together and press them firmly
   WARNING - IT STITCHES IMMEDIATELY
7. Use a clamp or band at the same time for at least 48 hours. This time, it's essential that the adhesive has fully cured.
8. Excess glue can be removed.
   * Always use in a well-ventilated area

NOTE: Sneaker Essentials is not responsible for the misuse of this product. The risk lies with the purchaser of this product.