{"title":"Pre- and post-treatment","description":"","products":[{"product_id":"angelus-brand-no-600-acrylic-finisher-glans","title":"Angelus Brand - No. 600 - Acrylic Finisher - Gloss","description":"\u003cp\u003eAngelus Brand Acrylic Finisher Regular Gloss acts as a protective layer and makes your shoes more scratch-resistant. The finisher is water-resistant and dries flexible.\u003c\/p\u003e\n\n\u003cp\u003e All finishers add some degree of gloss, even the Matte finisher adds a little bit of gloss.\u003c\/p\u003e\n\n\u003cp\u003e The order of low gloss to high gloss is as follows:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Mat - No. 620\u003c\/li\u003e\n\n\u003cli\u003e Satin - No. 605\u003c\/li\u003e\n\n\u003cli\u003e Regular (gloss) - No. 600\u003c\/li\u003e\n\n\u003cli\u003e Satin High Gloss - No. 610\u003c\/li\u003e\n\n\u003cli\u003e High Gloss - No. 615\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e Method:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Apply several thin layers of paint.\u003c\/li\u003e\n\n\u003cli\u003e After painting the last layer, allow the result to dry for 24 hours.\u003c\/li\u003e\n\n\u003cli\u003e You can apply the finisher with a sponge, cloth or small brush.\u003c\/li\u003e\n\n\u003cli\u003e Apply thin, even layers of finisher.\u003c\/li\u003e\n\n\u003cli\u003e Let it dry between each layer.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n \u003cp\u003eYou can apply multiple coats. Each coat provides additional protection. Finisher protects and accentuates the sheen of Angelus leather dye. The base colors have a soft sheen; neon colors are more matte. Choose a finisher to enhance the result and provide a water-repellent protective layer.\u003c\/p\u003e\n\n\u003cp\u003e Angelus Brand is the best source for premium leather shoe polish, developed and manufactured in the United States. This specialty polish is perfect for shoes due to its flexibility and water resistance. It also mixes well with other Angelus leather polish colors.\u003c\/p\u003e","brand":"Angelus Brand","offers":[{"title":"Default Title","offer_id":56905908846966,"sku":"999-600","price":9.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/600-Acrylic-Finisher-4-oz.jpg?v=1765921956"},{"product_id":"angelus-brand-no-605-acrylic-finisher-satijn","title":"Angelus Brand - No. 605 - Acrylic Finisher - Satin","description":"\u003cp\u003e Angelus Brand Acrylic Finisher satin acts as a protective layer and makes your shoes more scratch-resistant. The finisher is water-resistant and dries flexible.\u003c\/p\u003e\n\n\u003cp\u003e All finishers add some degree of gloss, even the Matte finisher adds a little bit of gloss.\u003c\/p\u003e\n\n\u003cp\u003e The order of low gloss to high gloss is as follows:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Mat - No. 620\u003c\/li\u003e\n\n\u003cli\u003e Satin - No. 605\u003c\/li\u003e\n\n\u003cli\u003e Regular (gloss) - No. 600\u003c\/li\u003e\n\n \u003cli\u003eSatin High Gloss - No. 610\u003c\/li\u003e\n\n\u003cli\u003e High Gloss - No. 615\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e Method:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Apply several thin layers of paint.\u003c\/li\u003e\n\n\u003cli\u003e After painting the last layer, allow the result to dry for 24 hours.\u003c\/li\u003e\n\n\u003cli\u003e You can apply the finisher with a sponge, cloth or small brush.\u003c\/li\u003e\n\n\u003cli\u003e Apply thin, even layers of finisher.\u003c\/li\u003e\n\n\u003cli\u003e Let it dry between each layer.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e You can apply multiple coats. Each coat provides additional protection. Finisher protects and accentuates the sheen of Angelus leather dye. The base colors have a soft sheen; neon colors are more matte. Choose a finisher to enhance the result and provide a water-repellent protective layer.\u003c\/p\u003e\n\n\u003cp\u003e Angelus Brand is the best source for premium leather shoe polish, developed and manufactured in the United States. This specialty polish is perfect for shoes due to its flexibility and water resistance. It also mixes well with other Angelus leather polish colors.\u003c\/p\u003e","brand":"Angelus Brand","offers":[{"title":"118ml","offer_id":56905908978038,"sku":"999-605-4oz","price":9.95,"currency_code":"EUR","in_stock":false},{"title":"29.5ml","offer_id":56905909010806,"sku":"999-605-1oz","price":5.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/605-Satin-Acrylic-Finisher-4-oz.jpg?v=1765921968"},{"product_id":"angelus-brand-no-620-acrylic-finisher-mat","title":"Angelus Brand - No. 620 - Acrylic Finisher - Matt","description":"\u003cp\u003eAngelus Brand Acrylic Finisher Matte acts as a protective layer and makes your shoes more scratch-resistant. The finisher is water-resistant and dries flexible.\u003c\/p\u003e\n\n\u003cp\u003e All finishers add some degree of gloss, even the Matte finisher adds a little bit of gloss.\u003c\/p\u003e\n\n\u003cp\u003e The order of low gloss to high gloss is as follows:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Mat - No. 620\u003c\/li\u003e\n\n\u003cli\u003e Satin - No. 605\u003c\/li\u003e\n\n\u003cli\u003e Regular (gloss) - No. 600\u003c\/li\u003e\n\n\u003cli\u003e Satin High Gloss - No. 610\u003c\/li\u003e\n\n\u003cli\u003e High Gloss - No. 615\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e Method:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Apply several thin layers of paint.\u003c\/li\u003e\n\n\u003cli\u003e After painting the last layer, allow the result to dry for 24 hours.\u003c\/li\u003e\n\n\u003cli\u003e You can apply the finisher with a sponge, cloth or small brush.\u003c\/li\u003e\n\n\u003cli\u003e Apply thin, even layers of finisher.\u003c\/li\u003e\n\n\u003cli\u003e Let it dry between each layer.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e You can apply multiple coats. Each coat provides additional protection. Finisher protects and accentuates the sheen of Angelus leather dye. The base colors have a soft sheen; neon colors are more matte. Choose a finisher to enhance the result and provide a water-repellent protective layer.\u003c\/p\u003e\n\n \u003cp\u003eAngelus Brand is the best source for premium leather shoe polish, developed and manufactured in the United States. This specialty polish is perfect for shoes due to its flexibility and water resistance. It also mixes well with other Angelus leather polish colors.\u003c\/p\u003e","brand":"Angelus Brand","offers":[{"title":"118ml","offer_id":56905909174646,"sku":"999-620-4oz","price":9.95,"currency_code":"EUR","in_stock":false},{"title":"29.5ml","offer_id":56905909207414,"sku":"999-620-1oz","price":5.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/620-Matte-Acrylic-Finisher-4-oz.jpg?v=1765921980"},{"product_id":"angelus-brand-professional-leather-preparer-and-deglazer","title":"Angelus Brand - Professional Leather Preparer and Deglazer","description":"\u003cp\u003e The Angelus Brand Preparer \u0026amp; Deglazer is specially designed for preparing leather. It allows you to thoroughly clean and degrease leather. It also removes any factory finish from new leather.\u003c\/p\u003e\n\n\u003cp\u003e You can apply it with a cloth, sponge, or cotton pad, for example. Wipe the desired area and let it dry completely. Afterward, you'll have a clean surface where the Angelus leather paint will adhere well. Proper pre-treatment is half the battle and ensures a good result.\u003c\/p\u003e\n\n\u003cp\u003e Tips:\u003cbr\u003e\n If you want to paint surfaces that are not made of leather, such as the side edges of rubber soles, clean them thoroughly with soap and water.\u003c\/p\u003e\n\n \u003cp\u003eAngelus Brand is the best source for premium leather shoe polish, developed and manufactured in the United States. This specialty polish is perfect for shoes due to its flexibility and water resistance. It also mixes well with other Angelus leather polish colors.\u003c\/p\u003e","brand":"Angelus Brand","offers":[{"title":"Default Title","offer_id":56905909502326,"sku":"999-005","price":12.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/angelus-preparer-deglazer.jpg?v=1765921993"},{"product_id":"angelus-brand-no-610-acrylic-finisher-high-gloss","title":"Angelus Brand - No. 610 - Acrylic Finisher - High gloss","description":"\u003cp\u003eAngelus Brand Acrylic Finisher Regular Gloss acts as a protective layer and makes your shoes more scratch-resistant. The finisher is water-resistant and dries flexible.\u003c\/p\u003e\n\n\u003cp\u003e All finishers add some degree of gloss, even the Matte finisher adds a little bit of gloss.\u003c\/p\u003e\n\n\u003cp\u003e The order of low gloss to high gloss is as follows:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Mat - No. 620\u003c\/li\u003e\n\n\u003cli\u003e Satin - No. 605\u003c\/li\u003e\n\n\u003cli\u003e Regular (gloss) - No. 600\u003c\/li\u003e\n\n\u003cli\u003e Satin High Gloss - No. 610\u003c\/li\u003e\n\n\u003cli\u003e High Gloss - No. 615\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e Method:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Apply several thin layers of paint.\u003c\/li\u003e\n\n\u003cli\u003e After painting the last layer, allow the result to dry for 24 hours.\u003c\/li\u003e\n\n\u003cli\u003e You can apply the finisher with a sponge, cloth or small brush.\u003c\/li\u003e\n\n\u003cli\u003e Apply thin, even layers of finisher.\u003c\/li\u003e\n\n\u003cli\u003e Let it dry between each layer.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n \u003cp\u003eYou can apply multiple coats. Each coat provides additional protection. Finisher protects and accentuates the sheen of Angelus leather dye. The base colors have a soft sheen; neon colors are more matte. Choose a finisher to enhance the result and provide a water-repellent protective layer.\u003c\/p\u003e\n\n\u003cp\u003e Angelus Brand is the best source for premium leather shoe polish, developed and manufactured in the United States. This specialty polish is perfect for shoes due to its flexibility and water resistance. It also mixes well with other Angelus leather polish colors.\u003c\/p\u003e","brand":"Angelus Brand","offers":[{"title":"Default Title","offer_id":56905921560950,"sku":"999-610","price":9.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/610-High-Gloss-Acrylic-Finisher-4-oz.jpg?v=1765922278"},{"product_id":"essential-deglazer","title":"Sneaker Essentials - Essential Deglazer - Pretreatment for customization","description":"\u003cp\u003e For best results, using \u003cb\u003eEssential Deglazer\u003c\/b\u003e is essential. Paint won't adhere well to surfaces that are still dirty and greasy or have a factory finish.\u003c\/p\u003e\n\n\u003cp\u003e Use this product in combination with the paint pens or leather paint.\u003c\/p\u003e\n\n \u003ch3\u003eHow do I use the Sneaker Essentials Essential Deglazer?\u003c\/h3\u003e\n\n\u003col\u003e\n\n\u003cli\u003e Make sure the leather is dust-free before you start.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eApply the Essential Deglazer to a lint-free cloth, sponge or cotton pad.\u003c\/li\u003e\n\n\u003cli\u003e Rub it thoroughly into the leather. This will remove dirt and factory finishes.\u003c\/li\u003e\n\n\u003cli\u003e For best results, repeat this process until all finishes are removed.\u003c\/li\u003e\n\n\u003cli\u003e After the cleaning process, you can dye the leather with a leather dye color of your choice.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003cp\u003eUse this product in a well-ventilated area and wear rubber or disposable gloves, if possible.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\n \u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eCaution: If used incorrectly, the Sneaker Essentials Essential Deglazer can damage the leather surface.\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTherefore, use this product entirely at \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eyour own risk\u003c\/em\u003e\u003c\/span\u003e !\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sneaker Essentials","offers":[{"title":"Default Title","offer_id":56905947414902,"sku":"SE-ESS-DEGL-100","price":8.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/Deglazer-new-solo-2.jpg?v=1765922691"},{"product_id":"liquid-kicks-top-coats-leather-sealer-mat-finish","title":"Liquid Kicks Top Coats - leather sealer - matte finish","description":"\u003cp\u003e Liquid Kicks Top Coats are the highest quality leather top coats or finishers in the industry!\u003c\/p\u003e\n\n\u003cp\u003e Liquid Kicks top coats are designed to protect your artwork on various surfaces, including leather, vinyl, PVC, canvas, cotton, and silk. They are extremely scratch-resistant, UV-resistant, waterproof, and chemical-resistant. LK Top Coats allow you to send your custom leather, canvas, and vinyl products out into the world with the confidence that they won't peel, crack, or fade and that they'll always look their best.\u003c\/p\u003e\n\n\u003ch3\u003e \u003cstrong\u003eThe different versions of Liquid Kicks finishers\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\u003ch2\u003e Liquid Kicks Top Coats Technical Data Sheet\u003c\/h2\u003e\n\n \u003cp\u003eLK Top Coats are a high-quality, water-based hybrid acrylic-polyurethane resin designed for use on leather and canvas. All products are manufactured in-house by LK Top Coats under strict quality control.\u003c\/p\u003e\n\n\u003ch3\u003e Preparation\u003c\/h3\u003e\n\n\u003cp\u003e Use a clean, lint-free microfiber cloth dampened with \u003ca href=\"https:\/\/sneakeressentials.nl\/product\/essential-deglazer\/\"\u003eEssential Deglazer\u003c\/a\u003e to clean only the leather surface you intend to paint. Don't overclean the surface. You should feel the surface change from smooth to tacky as you clean it. Once the feeling changes, it's sufficiently cleaned. Let the surface sit for 10 to 20 minutes to allow the solvents to escape. Don't force it to dry. Remove any dust or dirt with a clean, dry synthetic paintbrush.\u003c\/p\u003e\n\n\u003ch3\u003e Apply paint\u003c\/h3\u003e\n\n \u003cp\u003eWork in light coats until the color reaches the desired tone. Let each coat dry before moving on to the next. Once all the color is applied, let it dry thoroughly. You can do this by leaving it for 24 hours or by using a hairdryer or heat gun set to a maximum temperature of 175 degrees Celsius. Let the surface cool completely before applying the LK Top Coats.\u003c\/p\u003e\n\n\u003ch3\u003e Applying LK Top Coat\u003c\/h3\u003e\n\n\u003cp\u003e LK Top Coats finishers can be applied with a brush in 2 thin layers, but the best way to apply it is with an airbrush with a tip size between 0.2 mm - 0.7 mm and an air pressure between 25 psi - 35 psi.\u003cbr\u003e \nSpray the topcoat directly onto the surface from a distance of 10 to 15 cm with an airbrush, or from 10 to 20 cm with a spray gun. Apply the topcoat in even strokes, working from left to right and top to bottom, overlapping each previous stroke to create medium-wet layers. Let the topcoat dry before applying the next layer.\u003c\/p\u003e\n\n\u003ch3\u003e Drying\u003c\/h3\u003e\n\n\u003cp\u003e LK Top Coat finishers are best dried with a hairdryer or heat gun at a temperature no higher than 175 degrees Celsius. Air drying takes 35 to 50 minutes, depending on the ambient temperature and humidity. Drying with a hairdryer or heat gun should not exceed 10 minutes.\u003cbr\u003e\n LK Top Coats are ready to use after complete drying, but full chemical and scratch resistance is only achieved after 12 hours of curing at a normal room temperature of 21 degrees Celsius.\u003c\/p\u003e\n\n\u003ch3\u003e Processing time\u003c\/h3\u003e\n\n \u003cp\u003eOnce the product is poured into an open-air container such as an airbrush cup or mixing cup, it begins curing. A test showed that in a 236ml airbrush cup at 21 degrees Celsius, the product was usable for two hours before performance was affected.\u003c\/p\u003e\n\n\u003cp\u003e In a similar test in a 500ml cup, the product was usable for 6 hours. To extend shelf life, keep unused portions covered with a cap or lid. The shelf life of unopened bottles of LK Top Coat has been proven to be longer than 1 year under normal conditions.\u003c\/p\u003e\n\n\u003ch3\u003e Coverage\u003c\/h3\u003e\n\n\u003cp\u003e One 59ml bottle is sufficient for more than 15 pairs of leather shoes or one large leather car seat. Coverage on canvas depends on the type of canvas and its size.\u003c\/p\u003e\n\n\u003ch3\u003e Storage\u003c\/h3\u003e\n\n \u003cp\u003eStore between 10 and 25 degrees Celsius and away from prolonged exposure to direct sunlight to prevent oxidation. Prolonged exposure to temperatures above 50 degrees Celsius and below 0 degrees Celsius may result in reduced product performance. Keep the lid closed when not in use to prevent drying out.\u003c\/p\u003e\n\n\u003ch3\u003e Cleaning up\u003c\/h3\u003e\n\n\u003cp\u003e Clean all tools immediately with water, acetone, or Essential Deglazer. Cleaning dried topcoats requires harsh solvents such as MEK or volatile paint strippers. Remove all traces of finisher from the airbrush or spray gun immediately after use to prevent the product from drying in the airbrush and causing a hard-to-remove clog! Rinse until the cleaner no longer fogs the topcoat.\u003c\/p\u003e","brand":"Liquid Kicks","offers":[{"title":"59ml","offer_id":56906007544182,"sku":"LKTC-mat-2oz","price":17.5,"currency_code":"EUR","in_stock":false},{"title":"118ml","offer_id":56906007576950,"sku":"LKTC-mat-4oz","price":29.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/liquidkicks-matte-combo.jpg?v=1765924256"},{"product_id":"liquid-kicks-top-coats-leather-sealer-factory-finish","title":"Liquid Kicks Top Coats - leather sealer - factory finish","description":"\u003cp\u003e Liquid Kicks Top Coats are the highest quality leather top coats or finishers in the industry!\u003c\/p\u003e\n\n \u003cp\u003eLiquid Kicks top coats are designed to protect your artwork on various surfaces, including leather, vinyl, PVC, canvas, cotton, and silk. They are extremely scratch-resistant, UV-resistant, waterproof, and chemical-resistant. LK Top Coats allow you to send your custom leather, canvas, and vinyl products out into the world with the confidence that they won't peel, crack, or fade and that they'll always look their best.\u003c\/p\u003e\n\n\u003ch3\u003e The different versions of Liquid Kicks finishers\u003c\/h3\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ch2\u003e Liquid Kicks Top Coats Technical Data Sheet\u003c\/h2\u003e\n\n\u003cp\u003e LK Top Coats are a high-quality, water-based hybrid acrylic-polyurethane resin designed for use on leather and canvas. All products are manufactured in-house by LK Top Coats under strict quality control.\u003c\/p\u003e\n\n\u003ch3\u003e Preparation\u003c\/h3\u003e\n\n \u003cp\u003eUse a clean, lint-free microfiber cloth dampened with \u003ca href=\"https:\/\/sneakeressentials.nl\/product\/essential-deglazer\/\"\u003eEssential Deglazer\u003c\/a\u003e to clean only the leather surface you intend to paint. Don't overclean the surface. You should feel the surface change from smooth to tacky as you clean it. Once the feeling changes, it's sufficiently cleaned. Let the surface sit for 10 to 20 minutes to allow the solvents to escape. Don't force it to dry. Remove any dust or dirt with a clean, dry synthetic paintbrush.\u003c\/p\u003e\n\n\u003ch3\u003e Apply paint\u003c\/h3\u003e\n\n \u003cp\u003eWork in light coats until the color reaches the desired tone. Let each coat dry before moving on to the next. Once all the color is applied, let it dry thoroughly. You can do this by leaving it for 24 hours or by using a hairdryer or heat gun set to a maximum temperature of 175 degrees Celsius. Let the surface cool completely before applying the LK Top Coats.\u003c\/p\u003e\n\n\u003ch3\u003e Applying LK Top Coat\u003c\/h3\u003e\n\n\u003cp\u003e LK Top Coats finishers can be applied with a brush in 2 thin layers, but the best way to apply it is with an airbrush with a tip size between 0.2 mm - 0.7 mm and an air pressure between 25 psi - 35 psi.\u003cbr\u003e \nSpray the topcoat directly onto the surface from a distance of 10 to 15 cm with an airbrush, or from 10 to 20 cm with a spray gun. Apply the topcoat in even strokes, working from left to right and top to bottom, overlapping each previous stroke to create medium-wet layers. Let the topcoat dry before applying the next layer.\u003c\/p\u003e\n\n\u003ch3\u003e Drying\u003c\/h3\u003e\n\n\u003cp\u003e LK Top Coat finishers are best dried with a hairdryer or heat gun at a temperature no higher than 175 degrees Celsius. Air drying takes 35 to 50 minutes, depending on the ambient temperature and humidity. Drying with a hairdryer or heat gun should not exceed 10 minutes.\u003cbr\u003e\n LK Top Coats are ready to use after complete drying, but full chemical and scratch resistance is only achieved after 12 hours of curing at a normal room temperature of 21 degrees Celsius.\u003c\/p\u003e\n\n\u003ch3\u003e Processing time\u003c\/h3\u003e\n\n \u003cp\u003eOnce the product is poured into an open-air container such as an airbrush cup or mixing cup, it begins curing. A test showed that in a 236ml airbrush cup at 21 degrees Celsius, the product was usable for two hours before performance was affected.\u003c\/p\u003e\n\n\u003cp\u003e In a similar test in a 500ml cup, the product was usable for 6 hours. To extend shelf life, keep unused portions covered with a cap or lid. The shelf life of unopened bottles of LK Top Coat has been proven to be longer than 1 year under normal conditions.\u003c\/p\u003e\n\n\u003ch3\u003e Coverage\u003c\/h3\u003e\n\n\u003cp\u003e One 59ml bottle is sufficient for more than 15 pairs of leather shoes or one large leather car seat. Coverage on canvas depends on the type of canvas and its size.\u003c\/p\u003e\n\n\u003ch3\u003e Storage\u003c\/h3\u003e\n\n \u003cp\u003eStore between 10 and 25 degrees Celsius and away from prolonged exposure to direct sunlight to prevent oxidation. Prolonged exposure to temperatures above 50 degrees Celsius and below 0 degrees Celsius may result in reduced product performance. Keep the lid closed when not in use to prevent drying out.\u003c\/p\u003e\n\n\u003ch3\u003e Cleaning up\u003c\/h3\u003e\n\n\u003cp\u003e Clean all tools immediately with water, acetone, or Essential Deglazer. Cleaning dried topcoats requires harsh solvents such as MEK or volatile paint strippers. Remove all traces of finisher from the airbrush or spray gun immediately after use to prevent the product from drying in the airbrush and causing a hard-to-remove clog! Rinse until the cleaner no longer fogs the topcoat.\u003c\/p\u003e","brand":"Liquid Kicks","offers":[{"title":"118ml","offer_id":56906014654838,"sku":"LKTC-factory-4oz","price":29.95,"currency_code":"EUR","in_stock":false},{"title":"59ml","offer_id":56906014687606,"sku":"LKTC-factory-2oz","price":17.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/liquidkicks-factory-combo.jpg?v=1765924291"},{"product_id":"liquid-kicks-top-coats-leather-sealer-gloss-finish","title":"Liquid Kicks Top Coats - leather sealer - gloss finish","description":"\u003cp\u003e Liquid Kicks Top Coats are the highest quality leather top coats or finishers in the industry!\u003c\/p\u003e\n\n \u003cp\u003eLiquid Kicks top coats are designed to protect your artwork on various surfaces, including leather, vinyl, PVC, canvas, cotton, and silk. They are extremely scratch-resistant, UV-resistant, waterproof, and chemical-resistant. LK Top Coats allow you to send your custom leather, canvas, and vinyl products out into the world with the confidence that they won't peel, crack, or fade and that they'll always look their best.\u003c\/p\u003e\n\n\u003ch3\u003e \u003cstrong\u003eThe different versions of Liquid Kicks finishers\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ch2\u003e Liquid Kicks Top Coats Technical Data Sheet\u003c\/h2\u003e\n\n\u003cp\u003e LK Top Coats are a high-quality, water-based hybrid acrylic-polyurethane resin designed for use on leather and canvas. All products are manufactured in-house by LK Top Coats under strict quality control.\u003c\/p\u003e\n\n\u003ch3\u003e Preparation\u003c\/h3\u003e\n\n \u003cp\u003eUse a clean, lint-free microfiber cloth dampened with \u003ca href=\"https:\/\/sneakeressentials.nl\/product\/essential-deglazer\/\"\u003eEssential Deglazer\u003c\/a\u003e to clean only the leather surface you intend to paint. Don't overclean the surface. You should feel the surface change from smooth to tacky as you clean it. Once the feeling changes, it's sufficiently cleaned. Let the surface sit for 10 to 20 minutes to allow the solvents to escape. Don't force it to dry. Remove any dust or dirt with a clean, dry synthetic paintbrush.\u003c\/p\u003e\n\n\u003ch3\u003e Apply paint\u003c\/h3\u003e\n\n \u003cp\u003eWork in light coats until the color reaches the desired tone. Let each coat dry before moving on to the next. Once all the color is applied, let it dry thoroughly. You can do this by leaving it for 24 hours or by using a hairdryer or heat gun set to a maximum temperature of 175 degrees Celsius. Let the surface cool completely before applying the LK Top Coats.\u003c\/p\u003e\n\n\u003ch3\u003e Applying LK Top Coat\u003c\/h3\u003e\n\n\u003cp\u003e LK Top Coats finishers can be applied with a brush in 2 thin layers, but the best way to apply it is with an airbrush with a tip size between 0.2 mm - 0.7 mm and an air pressure between 25 psi - 35 psi.\u003cbr\u003e \nSpray the topcoat directly onto the surface from a distance of 10 to 15 cm with an airbrush, or from 10 to 20 cm with a spray gun. Apply the topcoat in even strokes, working from left to right and top to bottom, overlapping each previous stroke to create medium-wet layers. Let the topcoat dry before applying the next layer.\u003c\/p\u003e\n\n\u003ch3\u003e Drying\u003c\/h3\u003e\n\n\u003cp\u003e LK Top Coat finishers are best dried with a hairdryer or heat gun at a temperature no higher than 175 degrees Celsius. Air drying takes 35 to 50 minutes, depending on the ambient temperature and humidity. Drying with a hairdryer or heat gun should not exceed 10 minutes.\u003cbr\u003e\n LK Top Coats are ready to use after complete drying, but full chemical and scratch resistance is only achieved after 12 hours of curing at a normal room temperature of 21 degrees Celsius.\u003c\/p\u003e\n\n\u003ch3\u003e Processing time\u003c\/h3\u003e\n\n \u003cp\u003eOnce the product is poured into an open-air container such as an airbrush cup or mixing cup, it begins curing. A test showed that in a 236ml airbrush cup at 21 degrees Celsius, the product was usable for two hours before performance was affected.\u003c\/p\u003e\n\n\u003cp\u003e In a similar test in a 500ml cup, the product was usable for 6 hours. To extend shelf life, keep unused portions covered with a cap or lid. The shelf life of unopened bottles of LK Top Coat has been proven to be longer than 1 year under normal conditions.\u003c\/p\u003e\n\n\u003ch3\u003e Coverage\u003c\/h3\u003e\n\n\u003cp\u003e One 59ml bottle is sufficient for more than 15 pairs of leather shoes or one large leather car seat. Coverage on canvas depends on the type of canvas and its size.\u003c\/p\u003e\n\n\u003ch3\u003e Storage\u003c\/h3\u003e\n\n \u003cp\u003eStore between 10 and 25 degrees Celsius and away from prolonged exposure to direct sunlight to prevent oxidation. Prolonged exposure to temperatures above 50 degrees Celsius and below 0 degrees Celsius may result in reduced product performance. Keep the lid closed when not in use to prevent drying out.\u003c\/p\u003e\n\n\u003ch3\u003e Cleaning up\u003c\/h3\u003e\n\n\u003cp\u003e Clean all tools immediately with water, acetone, or Essential Deglazer. Cleaning dried topcoats requires harsh solvents such as MEK or volatile paint strippers. Remove all traces of finisher from the airbrush or spray gun immediately after use to prevent the product from drying in the airbrush and causing a hard-to-remove clog! Rinse until the cleaner no longer fogs the topcoat.\u003c\/p\u003e","brand":"Liquid Kicks","offers":[{"title":"59ml","offer_id":56906018914678,"sku":"LKTC-gloss-2oz","price":17.5,"currency_code":"EUR","in_stock":true},{"title":"118ml","offer_id":56906018947446,"sku":"LKTC-gloss-4oz","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/liquidkicks-gloss-combo.jpg?v=1765924311"},{"product_id":"liquid-kicks-top-coats-leather-sealer-flat-finish","title":"Liquid Kicks Top Coats - leather sealer - flat finish","description":"\u003cp\u003e Liquid Kicks Top Coats are the highest quality leather top coats or finishers in the industry!\u003c\/p\u003e\n\n \u003cp\u003eLiquid Kicks top coats are designed to protect your artwork on various surfaces, including leather, vinyl, PVC, canvas, cotton, and silk. They are extremely scratch-resistant, UV-resistant, waterproof, and chemical-resistant. LK Top Coats allow you to send your custom leather, canvas, and vinyl products out into the world with the confidence that they won't peel, crack, or fade and that they'll always look their best.\u003c\/p\u003e\n\n\u003ch3\u003e \u003cstrong\u003eThe different versions of Liquid Kicks finishers\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ch2\u003e Liquid Kicks Top Coats Technical Data Sheet\u003c\/h2\u003e\n\n\u003cp\u003e LK Top Coats are a high-quality, water-based hybrid acrylic-polyurethane resin designed for use on leather and canvas. All products are manufactured in-house by LK Top Coats under strict quality control.\u003c\/p\u003e\n\n\u003ch3\u003e Preparation\u003c\/h3\u003e\n\n \u003cp\u003eUse a clean, lint-free microfiber cloth dampened with \u003ca href=\"https:\/\/sneakeressentials.nl\/product\/essential-deglazer\/\"\u003eEssential Deglazer\u003c\/a\u003e to clean only the leather surface you intend to paint. Don't overclean the surface. You should feel the surface change from smooth to tacky as you clean it. Once the feeling changes, it's sufficiently cleaned. Let the surface sit for 10 to 20 minutes to allow the solvents to escape. Don't force it to dry. Remove any dust or dirt with a clean, dry synthetic paintbrush.\u003c\/p\u003e\n\n\u003ch3\u003e Apply paint\u003c\/h3\u003e\n\n \u003cp\u003eWork in light coats until the color reaches the desired tone. Let each coat dry before moving on to the next. Once all the color is applied, let it dry thoroughly. You can do this by leaving it for 24 hours or by using a hairdryer or heat gun set to a maximum temperature of 175 degrees Celsius. Let the surface cool completely before applying the LK Top Coats.\u003c\/p\u003e\n\n\u003ch3\u003e Applying LK Top Coat\u003c\/h3\u003e\n\n\u003cp\u003e LK Top Coats finishers can be applied with a brush in 2 thin layers, but the best way to apply it is with an airbrush with a tip size between 0.2 mm - 0.7 mm and an air pressure between 25 psi - 35 psi.\u003cbr\u003e \nSpray the topcoat directly onto the surface from a distance of 10 to 15 cm with an airbrush, or from 10 to 20 cm with a spray gun. Apply the topcoat in even strokes, working from left to right and top to bottom, overlapping each previous stroke to create medium-wet layers. Let the topcoat dry before applying the next layer.\u003c\/p\u003e\n\n\u003ch3\u003e Drying\u003c\/h3\u003e\n\n\u003cp\u003e LK Top Coat finishers are best dried with a hairdryer or heat gun at a temperature no higher than 175 degrees Celsius. Air drying takes 35 to 50 minutes, depending on the ambient temperature and humidity. Drying with a hairdryer or heat gun should not exceed 10 minutes.\u003cbr\u003e\n LK Top Coats are ready to use after complete drying, but full chemical and scratch resistance is only achieved after 12 hours of curing at a normal room temperature of 21 degrees Celsius.\u003c\/p\u003e\n\n\u003ch3\u003e Processing time\u003c\/h3\u003e\n\n \u003cp\u003eOnce the product is poured into an open-air container such as an airbrush cup or mixing cup, it begins curing. A test showed that in a 236ml airbrush cup at 21 degrees Celsius, the product was usable for two hours before performance was affected.\u003c\/p\u003e\n\n\u003cp\u003e In a similar test in a 500ml cup, the product was usable for 6 hours. To extend shelf life, keep unused portions covered with a cap or lid. The shelf life of unopened bottles of LK Top Coat has been proven to be longer than 1 year under normal conditions.\u003c\/p\u003e\n\n\u003ch3\u003e Coverage\u003c\/h3\u003e\n\n\u003cp\u003e One 59ml bottle is sufficient for more than 15 pairs of leather shoes or one large leather car seat. Coverage on canvas depends on the type of canvas and its size.\u003c\/p\u003e\n\n\u003ch3\u003e Storage\u003c\/h3\u003e\n\n \u003cp\u003eStore between 10 and 25 degrees Celsius and away from prolonged exposure to direct sunlight to prevent oxidation. Prolonged exposure to temperatures above 50 degrees Celsius and below 0 degrees Celsius may result in reduced product performance. Keep the lid closed when not in use to prevent drying out.\u003c\/p\u003e\n\n\u003ch3\u003e Cleaning up\u003c\/h3\u003e\n\n\u003cp\u003e Clean all tools immediately with water, acetone, or Essential Deglazer. Cleaning dried topcoats requires harsh solvents such as MEK or volatile paint strippers. Remove all traces of finisher from the airbrush or spray gun immediately after use to prevent the product from drying in the airbrush and causing a hard-to-remove clog! Rinse until the cleaner no longer fogs the topcoat.\u003c\/p\u003e","brand":"Liquid Kicks","offers":[{"title":"59ml","offer_id":56906019078518,"sku":"LKTC-flat-2oz","price":17.5,"currency_code":"EUR","in_stock":false},{"title":"118ml","offer_id":56906019111286,"sku":"LKTC-flat-4oz","price":29.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/liquidkicks-flat-combo.jpg?v=1765924327"},{"product_id":"liquid-kicks-top-coats-intercoat-layer-builder","title":"Liquid Kicks Top Coats - Intercoat layer builder","description":"\u003cp\u003e Liquid Kicks Top Coats are the highest quality leather top coats or finishers in the industry!\u003c\/p\u003e\n\n \u003cp\u003eLiquid Kicks top coats are designed to protect your artwork on various surfaces, including leather, vinyl, PVC, canvas, cotton, and silk. They are extremely scratch-resistant, UV-resistant, waterproof, and chemical-resistant. LK Top Coats allow you to send your custom leather, canvas, and vinyl products out into the world with the confidence that they won't peel, crack, or fade and that they'll always look their best.\u003c\/p\u003e\n\n\u003ch2\u003e Liquid Kicks Top Coats Technical Data Sheet\u003c\/h2\u003e\n\n \u003cp\u003eLK Intercoat is a water-based acrylic coating designed to block chemical reactions and bleeding between paint layers. Apply the intercoat layer just before applying details. Apply two coats of the intercoat layer builder before painting. The undercoat will be protected because the intercoat layer builder acts as a barrier. This allows you to paint worry-free. It's compatible with solvent-based paints, so this product can be used in many applications!\u003c\/p\u003e\n\n\u003ch3\u003e Preparation\u003c\/h3\u003e\n\n\u003cp\u003e All coats of paint under Intercoat \u003cstrong\u003eMUST BE COMPLETELY DRY\u003c\/strong\u003e before applying Intercoat. Remove all dust before applying. This product is \u003cstrong\u003eNOT\u003c\/strong\u003e to be used as a primer.\u003c\/p\u003e\n\n\u003ch3\u003e Application\u003c\/h3\u003e\n\n \u003cp\u003eApply the Intercoat in two to three coats using an airbrush or a soft \u003ca href=\"https:\/\/sneakeressentials.nl\/?product_cat=customizen\/penselen-overige\"\u003ebrush\u003c\/a\u003e . Start with a light coat. Dry it quickly after application with a hairdryer until the surface is dry. \u003cstrong\u003eDO NOT USE A HEAT GUN\u003c\/strong\u003e , as this can burn the Intercoat. Before applying the next coat, ensure the surface is cool to the touch.\u003c\/p\u003e\n\n\u003cp\u003e Apply the second coat as a medium wet coat and then dry it quickly with a hairdryer. Applying a third coat is only recommended if you don't plan on adding more layers of paint or if you anticipate heavy erasing.\u003c\/p\u003e\n\n\u003ch3\u003e Application with stencils\u003c\/h3\u003e\n\n\u003cp\u003e Intercoat is also designed for extremely clean stenciling. Using Intercoat after applying a stencil will significantly reduce stencil problems such as lifting and bleeding.\u003c\/p\u003e\n\n\u003cul\u003e\n\n \u003cli\u003eTo use as a stencil blocker, apply \u003ca href=\"https:\/\/sneakeressentials.nl\/?product_cat=customizen\/stencils\"\u003estencils\u003c\/a\u003e to a fully prepared and dried surface.\u003c\/li\u003e\n\n\u003cli\u003e Make sure the stencil is completely flat with no air bubbles and then apply two very light coats of Intercoat and let air dry for 10 minutes.\u003c\/li\u003e\n\n\u003cli\u003e Apply colors to stenciled areas and let dry.\u003c\/li\u003e\n\n\u003cli\u003e Remove the stencil and apply another thin layer of Intercoat to melt the paint edge, preventing any high edges from the tape.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e Convert coatings\u003c\/h3\u003e\n\n\u003cp\u003e In some situations, paint needs to be stronger than it's designed to be. Certain inks have a binder that's too weak to use on flexible surfaces. To increase ink strength, add 1 to 3 drops of Intercoat to 10 drops of ink, mix, and spray. Compatible with all water-based paints.\u003c\/p\u003e\n\n\u003ch3\u003e Mixing prevention\u003c\/h3\u003e\n\n \u003cp\u003eThe chemistry of the Intercoat layer builder allows it to dry quickly and forms a barrier between paints that would normally cause mixing. For example, light pink and white. Intercoat is non-reactive and will prevent most dyes and paints from corroding the subsequent coat. Two or three light coats are required.\u003c\/p\u003e\n\n\u003cp\u003e Intercoat does not contain UV blockers and is not as flexible or scratch-resistant as our topcoats. It should not be used as a topcoat.\u003c\/p\u003e","brand":"Liquid Kicks","offers":[{"title":"59ml","offer_id":56906019504502,"sku":"LKTC-intercoat-2oz","price":17.5,"currency_code":"EUR","in_stock":false},{"title":"118ml","offer_id":56906019537270,"sku":"LKTC-intercoat-4oz","price":27.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/liquidkicks-intercoat-2oz.jpg?v=1765924341"},{"product_id":"liquid-kicks-top-coats-primer","title":"Liquid Kicks Top Coats - Primer","description":"\u003cp\u003e Liquid Kicks Primer gives your paint the ultimate base! This primer chemically bonds to the surface, giving your paint the best foundation to adhere to! LK Primer is clear but has a slight milky cast, so apply it only to the areas you want to paint. It works with any paint you apply over it.\u003c\/p\u003e\n\n\u003ch2\u003e Liquid Kicks Primer. Technical data sheet\u003c\/h2\u003e\n\n\u003ch3\u003e Preparation\u003c\/h3\u003e\n\n \u003cp\u003eUse a clean, lint-free microfiber cloth dampened with \u003ca href=\"https:\/\/sneakeressentials.nl\/product\/essential-deglazer\/\"\u003eEssential Deglazer\u003c\/a\u003e to clean only the leather surface you intend to paint. Don't overclean the surface. You should feel the surface change from smooth to tacky as you clean it. Once the feeling changes, it's sufficiently cleaned. Let the surface sit for 10 to 20 minutes to allow the solvents to escape. Don't force it to dry. Remove any dust or dirt with a clean, dry synthetic paintbrush.\u003c\/p\u003e\n\n\u003ch3\u003e Apply primer\u003c\/h3\u003e\n\n \u003cp\u003eLK Primer can be applied with a soft brush, but the best way to apply it is with an airbrush with a tip size between 0.2 mm and 0.7 mm and an air pressure of between 25 and 35 psi. Spray the primer directly onto the surface from a distance of 3 to 5 inches with an airbrush, or 4 to 8 inches with a spray gun. Apply in even coats, working from left to right and top to bottom, overlapping each previous stroke to create medium-wet coats. Allow the primer to dry completely before applying the next coat. You can use a hairdryer to force it dry, but be sure to let the surface cool completely before proceeding.\u003c\/p\u003e\n\n\u003ch3\u003e Processing time\u003c\/h3\u003e\n\n\u003cp\u003e Once the product is poured into an open-air container such as an airbrush cup or mixing cup, it begins curing. A test showed that in a 236ml airbrush cup at 21 degrees Celsius, the product was usable for two hours before performance was affected.\u003c\/p\u003e\n\n \u003cp\u003eIn a similar test in a 500ml cup, the product was usable for 6 hours. To extend shelf life, keep unused portions covered with a cap or lid. The shelf life of unopened bottles of LK Top Coat has been proven to be longer than 1 year under normal conditions.\u003c\/p\u003e\n\n\u003ch3\u003e Coverage\u003c\/h3\u003e\n\n\u003cp\u003e One 59ml bottle is sufficient for more than 15 pairs of leather shoes or one large leather car seat. Coverage on canvas depends on the type of canvas and its size.\u003c\/p\u003e\n\n\u003ch3\u003e Storage\u003c\/h3\u003e\n\n\u003cp\u003e Store between 10 and 25 degrees Celsius and away from prolonged exposure to direct sunlight to prevent oxidation. Prolonged exposure to temperatures above 50 degrees Celsius and below 0 degrees Celsius may result in reduced product performance. Keep the lid closed when not in use to prevent drying out.\u003c\/p\u003e\n\n\u003ch3\u003e Cleaning up\u003c\/h3\u003e\n\n \u003cp\u003eClean all tools immediately with water, acetone, or Essential Deglazer. Cleaning dried topcoats requires harsh solvents such as MEK or volatile paint strippers. Remove all traces of finisher from the airbrush or spray gun immediately after use to prevent the product from drying in the airbrush and causing a hard-to-remove clog! Rinse until the cleaner no longer fogs the topcoat.\u003c\/p\u003e","brand":"Liquid Kicks","offers":[{"title":"118ml","offer_id":56906041000310,"sku":"LKTC-primer-4oz","price":27.5,"currency_code":"EUR","in_stock":true},{"title":"59ml","offer_id":56906041033078,"sku":"LKTC-primer-2oz","price":17.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/liquidkicks-primer-combo.jpg?v=1765924552"},{"product_id":"angelus-brand-4-coat-mat","title":"Angelus Brand - 4-Coat - Matte - Urethane Finisher","description":"\u003cp\u003e Angelus 4-Coat is formulated as the most durable, flexible, and scratch-resistant clearcoat on the market. This urethane-based topcoat resists most scratches and scrapes, keeping your project looking its best!\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eWhat is the difference between 4-Coat and Angelus Acrylic Finisher?\u003c\/strong\u003e\u003c\/p\u003e\n\n \u003cp\u003eThe Acrylic finisher is designed to enhance the sheen of the project; while the 4-Coat is a urethane finisher that is scratch-resistant, making it more durable and offering additional protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eShould I use both the 4-Coat and the Acrylic Finisher on my project?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e No, you use one or the other. The 4-coat finisher is more scratch-resistant and durable.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCan I use it in an airbrush device?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Yes! It doesn't need to be thinned; you can use it directly in the airbrush.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eMethod:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Apply several thin layers of paint.\u003c\/li\u003e\n\n\u003cli\u003e After painting the last layer, allow the result to dry for 24 hours.\u003c\/li\u003e\n\n\u003cli\u003e You can apply the finisher with a sponge, cloth or small brush.\u003c\/li\u003e\n\n\u003cli\u003e Apply thin, even layers of finisher.\u003c\/li\u003e\n\n\u003cli\u003e Let it dry between each layer.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e You can apply multiple coats. Each coat provides additional protection. 4-Coat protects Angelus leather paint.\u003c\/p\u003e\n\n \u003cp\u003eAngelus Brand is the best source for premium leather shoe polish, developed and manufactured in the United States. This specialty polish is perfect for shoes due to its flexibility and water resistance. It also mixes well with other Angelus leather polish colors.\u003c\/p\u003e","brand":"Angelus Brand","offers":[{"title":"29.5ml","offer_id":56906059186550,"sku":"902-000-1oz","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"118ml","offer_id":56906059219318,"sku":"902-000-4oz","price":19.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/4-COATMATTE4oz.jpg?v=1765924884"},{"product_id":"angelus-brand-4-coat-flat","title":"Angelus Brand - 4-Coat - Flat - Urethane Finisher","description":"\u003cp\u003e Angelus 4-Coat is formulated as the most durable, flexible, and scratch-resistant clearcoat on the market. This urethane-based topcoat resists most scratches and scrapes, keeping your project looking its best!\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eWhat is the difference between 4-Coat and Angelus Acrylic Finisher?\u003c\/strong\u003e\u003c\/p\u003e\n\n \u003cp\u003eThe Acrylic finisher is designed to enhance the sheen of the project; while the 4-Coat is a urethane finisher that is scratch-resistant, making it more durable and offering additional protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eShould I use both the 4-Coat and the Acrylic Finisher on my project?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e No, you use one or the other. The 4-coat finisher is more scratch-resistant and durable.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCan I use it in an airbrush device?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Yes! It doesn't need to be thinned; you can use it directly in the airbrush.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eMethod:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Apply several thin layers of paint.\u003c\/li\u003e\n\n\u003cli\u003e After painting the last layer, allow the result to dry for 24 hours.\u003c\/li\u003e\n\n\u003cli\u003e You can apply the finisher with a sponge, cloth or small brush.\u003c\/li\u003e\n\n\u003cli\u003e Apply thin, even layers of finisher.\u003c\/li\u003e\n\n\u003cli\u003e Let it dry between each layer.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e You can apply multiple coats. Each coat provides additional protection. 4-Coat protects Angelus leather paint.\u003c\/p\u003e\n\n \u003cp\u003eAngelus Brand is the best source for premium leather shoe polish, developed and manufactured in the United States. This specialty polish is perfect for shoes due to its flexibility and water resistance. It also mixes well with other Angelus leather polish colors.\u003c\/p\u003e","brand":"Angelus Brand","offers":[{"title":"29.5ml","offer_id":56906059317622,"sku":"901-000-1oz","price":9.95,"currency_code":"EUR","in_stock":false},{"title":"118ml","offer_id":56906059350390,"sku":"901-000-4oz","price":19.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/4-COATFlat4oz.jpg?v=1765924899"},{"product_id":"angelus-brand-4-coat-hoogglans","title":"Angelus Brand - 4-Coat - High Gloss - Urethane Finisher","description":"\u003cp\u003e Angelus 4-Coat is formulated as the most durable, flexible, and scratch-resistant clearcoat on the market. This urethane-based topcoat resists most scratches and scrapes, keeping your project looking its best!\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eWhat is the difference between 4-Coat and Angelus Acrylic Finisher?\u003c\/strong\u003e\u003c\/p\u003e\n\n \u003cp\u003eThe Acrylic finisher is designed to enhance the sheen of the project; while the 4-Coat is a urethane finisher that is scratch-resistant, making it more durable and offering additional protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eShould I use both the 4-Coat and the Acrylic Finisher on my project?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e No, you use one or the other. The 4-coat finisher is more scratch-resistant and durable.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCan I use it in an airbrush device?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Yes! It doesn't need to be thinned; you can use it directly in the airbrush.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eMethod:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Apply several thin layers of paint.\u003c\/li\u003e\n\n\u003cli\u003e After painting the last layer, allow the result to dry for 24 hours.\u003c\/li\u003e\n\n\u003cli\u003e You can apply the finisher with a sponge, cloth or small brush.\u003c\/li\u003e\n\n\u003cli\u003e Apply thin, even layers of finisher.\u003c\/li\u003e\n\n\u003cli\u003e Let it dry between each layer.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e You can apply multiple coats. Each coat provides additional protection. 4-Coat protects Angelus leather paint.\u003c\/p\u003e\n\n \u003cp\u003eAngelus Brand is the best source for premium leather shoe polish, developed and manufactured in the United States. This specialty polish is perfect for shoes due to its flexibility and water resistance. It also mixes well with other Angelus leather polish colors.\u003c\/p\u003e","brand":"Angelus Brand","offers":[{"title":"29.5ml","offer_id":56906059481462,"sku":"904-000-1oz","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"118ml","offer_id":56906059514230,"sku":"904-000-4oz","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/4-COATHighGloss4oz.jpg?v=1765924914"},{"product_id":"angelus-brand-4-coat-satijn","title":"Angelus Brand - 4-Coat - Satin - Urethane Finisher","description":"\u003cp\u003e Angelus 4-Coat is formulated as the most durable, flexible, and scratch-resistant clearcoat on the market. This urethane-based topcoat resists most scratches and scrapes, keeping your project looking its best!\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eWhat is the difference between 4-Coat and Angelus Acrylic Finisher?\u003c\/strong\u003e\u003c\/p\u003e\n\n \u003cp\u003eThe Acrylic finisher is designed to enhance the sheen of the project; while the 4-Coat is a urethane finisher that is scratch-resistant, making it more durable and offering additional protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eShould I use both the 4-Coat and the Acrylic Finisher on my project?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e No, you use one or the other. The 4-coat finisher is more scratch-resistant and durable.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCan I use it in an airbrush device?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Yes! It doesn't need to be thinned; you can use it directly in the airbrush.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eMethod:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Apply several thin layers of paint.\u003c\/li\u003e\n\n\u003cli\u003e After painting the last layer, allow the result to dry for 24 hours.\u003c\/li\u003e\n\n\u003cli\u003e You can apply the finisher with a sponge, cloth or small brush.\u003c\/li\u003e\n\n\u003cli\u003e Apply thin, even layers of finisher.\u003c\/li\u003e\n\n\u003cli\u003e Let it dry between each layer.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e You can apply multiple coats. Each coat provides additional protection. 4-Coat protects Angelus leather paint.\u003c\/p\u003e\n\n \u003cp\u003eAngelus Brand is the best source for premium leather shoe polish, developed and manufactured in the United States. This specialty polish is perfect for shoes due to its flexibility and water resistance. It also mixes well with other Angelus leather polish colors.\u003c\/p\u003e","brand":"Angelus Brand","offers":[{"title":"29.5ml","offer_id":56906059678070,"sku":"903-000-1oz","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"118ml","offer_id":56906059710838,"sku":"903-000-4oz","price":19.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/files\/4-COATSatin4oz.jpg?v=1765924929"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2309\/3366\/collections\/voorennabehandeling.jpg?v=1765920340","url":"https:\/\/sneakeressentials.nl\/en\/collections\/voor-en-nabehandeling.oembed","provider":"Sneaker Essentials","version":"1.0","type":"link"}